Below are the instructions for this essay. The company we have chosen is AETNA. I have also attached an excel that will be used with this essay. Also attached a copy of an example essay. Please note that citations must be used and cited properly.

1. Purpose of the project:

In this project, you are supposed to be a financial manager to apply the knowledge obtained from the Financial Management (FINC6352) course to estimate the cost of debt, cost of preferred stock, cost of common equity, capital structure, and the weighted average cost of capital (WACC) for a publicly-traded corporation of your choice. You will use the estimated WACC as the discount rate to perform capital budgeting analysis for a hypothetical project (the information is given below) that is under consideration by the selected company, and decide whether the project should be accepted.

2. Outline for the project:

(1) Executive Summary

- Summarize the major findings, results, and the analysis of the report.

(2) Financial Ratio Analysis

You are expected to apply the knowledge obtained in Financial Management and Financial Statement Analysis (ACCT6351) to the key financial ratios of the selected company.

- Perform trend analysis of the key financial ratios (i.e., liquidity ratios, asset management ratios, debt management ratios, profitability ratios, market value ratios) of the company during the most recent 5-year period.

- Perform industry (or benchmark companies) comparison analysis of the key financial ratios of the company in the most recent year.

- Based on the financial ratio analysis results, discuss/evaluate the financial performance of the company.

(3) Estimate Capital Structure

- Estimate the firm’s weights of debt, preferred stock, and common stock using the firm’s balance sheet (book value) in the most recent year.

- Estimate the firm’s weights of debt, preferred stock, and common stock using the market value of each capital component in the most recent year.

(4) Compute Weighted Average Cost of Capital (WACC)

- Estimate the firm’s before-tax and after-tax component cost of debt; (Note: If the information about the current corporate tax rate is not available, you need to estimate the tax rate based on the historical tax payments).

- Estimate the firm’s component cost of preferred stock;

- Use three approaches (CAPM, DCF, bond-yield-plus-risk-premium) to estimate the component cost of common equity for the firm.

- Calculate the firm’s weighted average cost of capital (WACC) using the market-based capital weights.

(5) Cash Flow Estimation

- We assume that the company you selected is considering a new project. The project has 8 years’ life. This project requires initial investment of $380 million to purchase equipment, and $30 million for shipping & installation fee. The fixed assets fall in the 7-year MACRS class. The salvage value of the fixed assets is 10.5% of the purchase price (including the shipping & installation fee). The number of units of the new product expected to be sold in the first year is 1,500,000 and the expected annual growth rate is 5.5%. The sales price is $255 per unit and the variable cost is $190 per unit in the first year, but they should be adjusted accordingly based on the estimated annualized inflation rate of 2.2%. The required net operating working capital (NOWC) is 9.5% of sales. Use the corporate tax rate obtained in Step (4) for the project. The project is assumed to have the same risk as the corporation, so you should use the WACC you obtained from prior steps as the discount rate. Note: you may revise the partial model in the file Ch11 P18 Build a Model.xls on the website of the textbook (also posted in this final project learning module in Blackboard) for capital budgeting analysis, but you are NOT required to strictly follow the partial model. Actually, you are encouraged to build a better model by yourself.

- Compute the depreciation basis and annual depreciation of the new project.

- Estimate annual cash flows for 8 years.

- Draw a time line of the cash flows.

(6) Capital Budgeting Analysis

- Using the WACC obtained from in Step (4) as the discount rate for this project, apply capital budgeting analysis techniques (NPV, IRR, MIRR, PI, Payback, Discounted Payback) to analyze the new project.

- Perform a sensitivity analysis for the effects of key variables (e.g., sales growth rate, cost of capital, unit costs, sales price) on the estimated NPV or IRR in order to demonstrate the sensitivity of the model. The Scenario analysis of several variables simultaneously is encouraged (but not required). A PDF document named Sensitivity Analysis in Excel is provided in this learning module. The article introduces the Data Table method that you can use for performing sensitivity analysis in Excel.

- Discuss whether the project should be taken and summarize your report.

3. Other information regarding the project:

(1) Choose a publicly-traded company in the healthcare industry. WE HAVE CHOSEN THE COMPANY: AETNA

(2) Your project should be well-organized and typed in a Word document and attach the important tables with your report. The style and organization of the project is also important. It accounts for 10 points. Do not directly copy any contents from any other resources. List the cited references in your project.

1. Purpose of the project:

In this project, you are supposed to be a financial manager to apply the knowledge obtained from the Financial Management (FINC6352) course to estimate the cost of debt, cost of preferred stock, cost of common equity, capital structure, and the weighted average cost of capital (WACC) for a publicly-traded corporation of your choice. You will use the estimated WACC as the discount rate to perform capital budgeting analysis for a hypothetical project (the information is given below) that is under consideration by the selected company, and decide whether the project should be accepted.

2. Outline for the project:

(1) Executive Summary

- Summarize the major findings, results, and the analysis of the report.

(2) Financial Ratio Analysis

You are expected to apply the knowledge obtained in Financial Management and Financial Statement Analysis (ACCT6351) to the key financial ratios of the selected company.

- Perform trend analysis of the key financial ratios (i.e., liquidity ratios, asset management ratios, debt management ratios, profitability ratios, market value ratios) of the company during the most recent 5-year period.

- Perform industry (or benchmark companies) comparison analysis of the key financial ratios of the company in the most recent year.

- Based on the financial ratio analysis results, discuss/evaluate the financial performance of the company.

(3) Estimate Capital Structure

- Estimate the firm’s weights of debt, preferred stock, and common stock using the firm’s balance sheet (book value) in the most recent year.

- Estimate the firm’s weights of debt, preferred stock, and common stock using the market value of each capital component in the most recent year.

(4) Compute Weighted Average Cost of Capital (WACC)

- Estimate the firm’s before-tax and after-tax component cost of debt; (Note: If the information about the current corporate tax rate is not available, you need to estimate the tax rate based on the historical tax payments).

- Estimate the firm’s component cost of preferred stock;

- Use three approaches (CAPM, DCF, bond-yield-plus-risk-premium) to estimate the component cost of common equity for the firm.

- Calculate the firm’s weighted average cost of capital (WACC) using the market-based capital weights.

(5) Cash Flow Estimation

- We assume that the company you selected is considering a new project. The project has 8 years’ life. This project requires initial investment of $380 million to purchase equipment, and $30 million for shipping & installation fee. The fixed assets fall in the 7-year MACRS class. The salvage value of the fixed assets is 10.5% of the purchase price (including the shipping & installation fee). The number of units of the new product expected to be sold in the first year is 1,500,000 and the expected annual growth rate is 5.5%. The sales price is $255 per unit and the variable cost is $190 per unit in the first year, but they should be adjusted accordingly based on the estimated annualized inflation rate of 2.2%. The required net operating working capital (NOWC) is 9.5% of sales. Use the corporate tax rate obtained in Step (4) for the project. The project is assumed to have the same risk as the corporation, so you should use the WACC you obtained from prior steps as the discount rate. Note: you may revise the partial model in the file Ch11 P18 Build a Model.xls on the website of the textbook (also posted in this final project learning module in Blackboard) for capital budgeting analysis, but you are NOT required to strictly follow the partial model. Actually, you are encouraged to build a better model by yourself.

- Compute the depreciation basis and annual depreciation of the new project.

- Estimate annual cash flows for 8 years.

- Draw a time line of the cash flows.

(6) Capital Budgeting Analysis

- Using the WACC obtained from in Step (4) as the discount rate for this project, apply capital budgeting analysis techniques (NPV, IRR, MIRR, PI, Payback, Discounted Payback) to analyze the new project.

- Perform a sensitivity analysis for the effects of key variables (e.g., sales growth rate, cost of capital, unit costs, sales price) on the estimated NPV or IRR in order to demonstrate the sensitivity of the model. The Scenario analysis of several variables simultaneously is encouraged (but not required). A PDF document named Sensitivity Analysis in Excel is provided in this learning module. The article introduces the Data Table method that you can use for performing sensitivity analysis in Excel.

- Discuss whether the project should be taken and summarize your report.

3. Other information regarding the project:

(1) Choose a publicly-traded company in the healthcare industry. WE HAVE CHOSEN THE COMPANY: AETNA

(2) Your project should be well-organized and typed in a Word document and attach the important tables with your report. The style and organization of the project is also important. It accounts for 10 points. Do not directly copy any contents from any other resources. List the cited references in your project.

There are 2 files including Word Document and an Excel Document

Editable Microsoft Word Document

Word Count: 2199 words including Graphs, Calculations and References

Editable Microsoft Excel Workbook

Worksheet Count: 1 worksheet

This above price is for already used answers. Please do not submit them directly as it may lead to plagiarism. Once paid, the deal will be non-refundable and there is no after-sale support for the quality or modification of the contents. Either use them for learning purpose or re-write them in your own language. If you are looking for new unused assignment, please use live chat to discuss and get best possible quote.

OverviewStudent are required to write responses to five case studies based on the first five week’s learning materials (including required readings):Please ensure you have completed Weeks 1-5 for the learning...Assessment 2: Academic essay: 30%You will write a 2000 word (+/- 10% acceptable) ‘academic essay’ that will assess your knowledge of course content and application of that knowledge to the assigned topic....ASSESSMENT 2 - INDUSTRY CASE STUDYFORMAT: REPORT (Please refer to the Curtin library online for 'Report Format').DUE DATEWeek 9 Monday April 26 2021, 11:55 PM (AWST)DESCRIPTIONWord Limit: 2000...Hello, I have a bill of quantities assignment due this week and to be honest the entire unit is not something I see myself ever doing. Its in an excel format but needs to be submitted as PDF file. Ive...Management1.a. Create a list of key challenges concerning international trade for a senior supply chain executive of a global enterprise.b. How would you prioritise this list? Provide justifications for...Subject: ENGG961: Systems Reliability EngineeringAssignment 2: Reliability Data ModellingPurpose:To complete failure data modelling by applying the knowledge learnt.Learning objectives:1. Understand and...2814ICT – DATA MANAGEMENT7003ICT – DATABASE DESIGNSchool of Information & Communication Technology Trimester 1, 2021 Assignment Part 1:Designing a Database for BigMAimsTo gain experience in designing...**Show All Questions**