Recent Question/Assignment
NIT2222 – NETWORKING TECHNOLOGIES
ASSIGNMENT-2 (30%)
WIDE AREA NETWORK TECHNOLOGIES
Objective:
By completing this assignment, students will be demonstrating their knowledge and skills leant from week 6 to week 12 which include;
o IPv4 and IPv6 address planning o Wide Area Network concepts o Wide Area Network technologies o Implement and configure IP routing of medium complexity
1. Business case
To be aligned with the recent developments in the IT industry small retail business company ABC Holdings Limited has decided to migrate their computer network from IPv4 to IPv6. Due to the budget limitations only the company Head Quarters (HQ) Office and two of its branch offices, Branch A and Branch B will be migrated to IPv6 first. Branch C migration will be carried out in the next year.
You are hired by the ABC Holdings Limited to perform the network migration.
2. Specifications:
ABC Holdings Limited has been allocated IPv6 address block 2000:XXXX::/48 to use in their network. Where XXXX are made of the last 4 digits of your student ID.
Branch C continues to operate on IPv4 network with 150.50.YZ.0 network address. Replace Y and Z with the last 2 digits on your student ID.
The company network topology is as shown in Figure 1 bellow.
Figure 1: Network Topology
3. Instructions
3.1 Address planning (20 marks)
• Work out the IPv6 subnets for the company Head Quarters (HQ) and each branch from the given IPv6 address block. (10 marks)
• Create the address assignment table for the company network that contain the address of each router interfaces, PCs and Servers. (10 marks)
3.2 IPv4 routing configuration (20 marks)
• Configure OSPF for routing between Branch-C and HQ router. Use IPv4 150.50.YZ.0/30 for networks between the routers.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.3 IPv6 routing configuration (20 marks)
• Configure EIGRP or OSPF for the IPv6 network.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.4 IPv4IPv6 Network NAT-PT (20 marks)
• Configure HQ router as IPv4IPv6 NAT router so that the new IPv6 HQ network can access the Branch C server, which has the IP address 150.50.YZ.100.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.5 Verification (20 marks)
• Perform the necessary verifications to test the performance of the implemented network on Packet Tracer. All computers should be able to ping any other computers on different networks and to the ports on the router.
Include necessary screenshots of ping and show commands on computers and routers in here.
4. Submission
You have to submit the design document as outlined above with a working Packet Tracer file to VU Collaborate Submission Box by the due date.
DO NOT ZIP THE SUBMISSION FILES.
You may be asked to demonstrate your solution, along with the document to your lecturer / lab tutor.
ASSIGNMENT-2 (30%)
WIDE AREA NETWORK TECHNOLOGIES
Objective:
By completing this assignment, students will be demonstrating their knowledge and skills leant from week 6 to week 12 which include;
o IPv4 and IPv6 address planning o Wide Area Network concepts o Wide Area Network technologies o Implement and configure IP routing of medium complexity
1. Business case
To be aligned with the recent developments in the IT industry small retail business company ABC Holdings Limited has decided to migrate their computer network from IPv4 to IPv6. Due to the budget limitations only the company Head Quarters (HQ) Office and two of its branch offices, Branch A and Branch B will be migrated to IPv6 first. Branch C migration will be carried out in the next year.
You are hired by the ABC Holdings Limited to perform the network migration.
2. Specifications:
ABC Holdings Limited has been allocated IPv6 address block 2000:XXXX::/48 to use in their network. Where XXXX are made of the last 4 digits of your student ID.
Branch C continues to operate on IPv4 network with 150.50.YZ.0 network address. Replace Y and Z with the last 2 digits on your student ID.
The company network topology is as shown in Figure 1 bellow.
Figure 1: Network Topology
3. Instructions
3.1 Address planning (20 marks)
• Work out the IPv6 subnets for the company Head Quarters (HQ) and each branch from the given IPv6 address block. (10 marks)
• Create the address assignment table for the company network that contain the address of each router interfaces, PCs and Servers. (10 marks)
3.2 IPv4 routing configuration (20 marks)
• Configure OSPF for routing between Branch-C and HQ router. Use IPv4 150.50.YZ.0/30 for networks between the routers.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.3 IPv6 routing configuration (20 marks)
• Configure EIGRP or OSPF for the IPv6 network.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.4 IPv4IPv6 Network NAT-PT (20 marks)
• Configure HQ router as IPv4IPv6 NAT router so that the new IPv6 HQ network can access the Branch C server, which has the IP address 150.50.YZ.100.
Include the configuration commands here for each router. Then enter them on devices in a Packet Tracer file to implement a functional network.
3.5 Verification (20 marks)
• Perform the necessary verifications to test the performance of the implemented network on Packet Tracer. All computers should be able to ping any other computers on different networks and to the ports on the router.
Include necessary screenshots of ping and show commands on computers and routers in here.
4. Submission
You have to submit the design document as outlined above with a working Packet Tracer file to VU Collaborate Submission Box by the due date.
DO NOT ZIP THE SUBMISSION FILES.
You may be asked to demonstrate your solution, along with the document to your lecturer / lab tutor.
Looking for answers ?
Recent Questions
Assessment 2: (20%) Case Study Presentation Due Date weeks 10This assessment builds on your theoretical knowledge and tests your ability to apply this knowledge to practice.you are required to formulate...Assessment 2Assessment 2Report: 30%Word count: 1400 – 1600 wordsDue date: Sunday of Week 8DescriptionYou are playing the role of a community service worker supporting a young adult son who is 18 years...1500-1800 wordsInstructions From TutorPlease download the eTask3 spreadsheet from Canvas and save the eTask spread as an Excel file. The main content of the force method is taught in Lectures 6,7&8.eTask3.1 is a...ASSIGNMENT INSTRUCTIONSAssessment Practical assessmentAssessment code: 011Academic Year: 2023/2024Trimester: 2Module Title: Critical Perspectives on Cross-Border BusinessModule Code: MOD009194Level: 6Module...Information Systems Analysis & DesignAssignmentDue date: Week 5 Friday (5 Apr 2024) 11:59 pm AESTWeighting: 30%Length: 1,200 to 1,500 words (penalty will apply if the length is outside this limit)Assessment...Problem:University of Technology Sydney 48353: CONCRETE DESIGN Autumn 2024 - Assignment 2 (13 Marks)The figure illustrates the cross-section of a reinforced concrete column with a hexagonal shape (equal...Show All Questions